Electric wood pellet machine

Wood pellets are the most common type of pellet fuel. Traditionally, people's energy needs come from fossil fuels such as coal, natural gas and oil. However, fossil fuels are limited resources that will eventually be run out, and the use of fossil energy has caused great damage to the environment. So it is important to find a new and clean energy. Wood pellets are such a fuel, which is why people choose wood pellets.

R-type electric wood pellet machine

R-type electric wood pellet machine is a GEMCO pellet machine developed specifically for biomass raw materials. Flat die, rotating roller, electric motor, the output can be up to 800 kg/h. To produce high quality wood pellets, customers can choose different compression ratios according to different raw materials. R-type electric wood pellet machine is usually used for processing hard wood such as maple, poplar, elm tree, oak, cypress, basswood, cherry, hickory, etc.

Advantages of R-type electric wood pellet machine

• All-steel structure, high-quality reducer, low noise and high molding rate.
• Both sides of flat die are available, the service life is prolonged.
• Flat die aperture: 2.5-10 mm.
• Compression ratios of common raw materials are provided.
• The best choice for high output and low energy consumption.

Parameters of R-type electric wood pellet machine

ZLSP200B

ZLSP300B

ZLSP400B

ZLSP550B

D-type electric wood pellet machine

D-type electric wood pellet machine is a new type of pellet machine, which is suitable for many kinds of biomass raw materials. The ideal raw materials include sawdust, straw, rice husk, bamboo shavings, peanut shell, bagasse, alfalfa and other raw materials. Flat die, rotating die, the output can be up to 250-400 kg/h.

Component advantages of D-type electric wood pellet machine

1. Control cabinet. The electric box adopts the form of spray plastic, the strength and toughness are enhanced and shell fracture will not occur. The built-in safety control system fully conforms to CE standard operating system. The emergency stop button can be used for emergency operation.
2. Gear box (Main box). Gear box is made of high quality cast iron, low noise and shock-absorbing. The built-in gear transmission has higher efficiency and longer service life than traditional  transmission.
3. Upper box. The built-in flat die and roller are made of superior alloy steel, the hardness is 55-60 HRC.  

Characteristics of D-type electric wood pellet machine

D-type wood pellet machine with half covered electric motor adopts high quality alloy steel, surface carburizing and quenching treatment, grinding fine machining. Smooth transmission, low noise, large carrying capacity, low temperature, long service life.

D-type wood pellet machine with fully covered electric motor possesses CE-motor, small and simple appearance. The diameter of feeder is large.

half covered electric motor

fully covered electric motor

Parameters of D-type electric wood pellet machine

Delivery pictures of electric wood pellet machine